[LUGSB] Bringing up interface eth0 fails

[Ilya Sukhanov (dotCOMmie)]

agent fat wrote:
> Ok so i got the eth0 issue fixed by enabling LAN Boot ROM in the bios.

Thats bizzare disabling LAN Boot ROM should not deactivate the network card. But
I've seen plenty bad bioses..

> 
> Now im trying to set up mandriva with my tv tuner card and am having issues.  So i installed the firmware drivers for ivtv, however i still cant get either tvTime or kdeTv to work with my system. I have been able to scan for tv channels with KdeTV but tvTime quit whenever i start it. I tried using mplayer to play the video and got an error  b4 it could start playing. Below is the output from dmseg for ivtv and also the output from mplayer /dev/video0
> 
> 
> And this is the output from player:
> 
> mplayer /dev/video0
> MPlayer 1.0-1.rc1.20mdv2008.0-4.2.1 (C) 2000-2006 MPlayer Team
> CPU: Intel(R) Celeron(R) CPU 3.06GHz (Family: 15, Model: 4, Stepping: 1)
> CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
> Compiled with runtime CPU detection.
> 98 audio & 216 video codecs
> mplayer: could not connect to socket
> mplayer: No such file or directory
> Failed to open LIRC support. You will not be able to use your remote control.
> 
> Playing /dev/video0.
> Win32 LoadLibrary failed to load: avisynth.dll, /usr/lib/win32/avisynth.dll, /usr/local/lib/win32/avisynth.dll
> MPEG-PS file format detected.
> VIDEO:  MPEG2  420x316  (aspect 2)  29.970 fps  8000.0 kbps (1000.0 kbyte/s)
> ==========================================================================
> Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
> VDec: vo config request - 420 x 316 (preferred colorspace: Mpeg PES)
> Could not find matching colorspace - retrying with -vf scale...
> Opening video filter: [scale]
> The selected video_out device is incompatible with this codec.
> Try adding the scale filter, e.g. -vf spp,scale instead of -vf spp.
> VDecoder init failed :(
> Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b
> Selected video codec: [mpeg12] vfm: libmpeg2 (MPEG-1 or 2 (libmpeg2))
> ==========================================================================
> ==========================================================================
> Trying to force audio codec driver family libmad...
> Opening audio decoder: [libmad] libmad mpeg audio decoder
> AUDIO: 48000 Hz, 2 ch, s16le, 224.0 kbit/14.58% (ratio: 28000->192000)
> Selected audio codec: [mad] afm: libmad (libMAD MPEG layer 1-2-3)
> ==========================================================================
> [AO OSS] audio_setup: Can't open audio device /dev/dsp: Device or resource busy

Are you having problems with the sound?

> AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
> Starting playback...
> VDec: vo config request - 420 x 316 (preferred colorspace: Planar YV12)
> VDec: using Planar YV12 as output csp (no 0)
> Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
> VO: [xv] 420x316 => 422x316 Planar YV12  [zoom]
> X11 error: BadAlloc (insufficient resources for operation)?,?% 6 0

This is also not an error I'd ignore. Are you using XV? What graphics card?

> Aborted
>

I'd try to dump the capture card stream to file to see if you can play that
perhaps even on another machine. Then you'll know whether is a playing or
capturing issue.